Tabla de contenido
C
d
e
F
A_Linomatic_Deluxe neu.indd 8
Only use the original Leifheit ground socket provided by
the manufacturer.
The socket should protrude slightly out of the ground so
that the cover can be closed.
Let the concrete set for a few days.
[3] Check whether the rotary dryer is correctly positioned
in the ground socket. When setting up the rotary dryer,
the bottom of the three holes in the slot of the central
pole must be covered by the upper edge of the ground
socket. Or the central pole must be sunk at least 21.5 cm
into the ground socket.
Opening:
The rotary dryer should be checked for damage prior to
each use and must only be used if a flawless condition can
be assumed. For your own safety before opening, please
make sure there is stable footing and that no items or
obstacles are behind your back.
[1] Only pull the pull-opening tensioning cord upwards
at an angle. After overcoming the initial resistance,
the rotary dryer can be opened easily until the desired
washing line tension is reached. The pull-opening
tensioning cord will retract automatically.
[2] Fasten the pull-opening cord knob on the sliding central
collar to prevent it damaging or being a trip hazard.
Closing:
[1] Push button and
[2] move arm downwards.
While carefully stepping out of the closing range and
ensuring a secure footing and a free area behind you.
Alternative-release button:
[1] Release the catch
[2] Lower the arms.
Use:
Close the rotary dryer after each use. This way the lines are
protected and remain clean. When hanging up laundry,
turn the rotary dryer in the ground socket. This saves time
14.10.22 14:5
Tabla de contenido
