Multiplex FunJet 2 Instrucciones De Montaje página 12

Accessories and tools
The following accessories are required to assemble the model
• 2 x servo Hitec HS-65HB
• 1x receiver RX-6-DR light M-LINK 2.4 GHz
• 2 x extension cable 15 cm
• 1x Zacki ELAPOR 20 g
®
• 1x plug fuses
EN
Required tool
• Small cross-tip screwdriver
• Hex wrench 1.5
• Punch Ø 4-5 mm or a small round file
• 10 mm open-ended wrench
• Possibly accelerator spray for CA adhesive
• Hot glue gun
Power recommendation
• Power kit FunJet 2
Contents:
Motor: ROXXY BL Outrunner C35-36-2270kv
Controller: ROXXY BL Control 755 S-BEC
Propeller: 5.5"x4.5"
Driver with spinner, for Ø 3.2 mm shafts,
6 mm propeller hole
• Battery: ROXXY EVO Lipo 3-2600M 40C
Specifications
Wingspan:
Fuselage length:
Flight weight:
Wing area:
Wing loading:
RC functions:
12
FunJet 2
783 mm
750 mm
Approx. 600 g
Approx. 14.5 dm²
43 g/dm²
Aileron, elevator (Delta Mix required) and motor control
Optional accessories
# 11 2065
• WINGSTABI 7-channel
# 5 5809 • WINGSTABI RX-7-DR M-LINK
# 8 5019 • Servo Nano Pro KARBONITE
# 85 2727 • Servo HS-65MG
# 1-00137
• Servo HS-5065MG
• Servo HS-5070MH
• Receiver RX-7-DR M-LINK 2.4 GHz
• Telemetry controller ROXXY Smart Control 70 MSB
• GPS V2 sensor for M-LINK receiver
• Flight recorder
• Propeller balancer
# 1-00961 • Power kit FunJet ULTRA 2
Contents:
# 1-00997
Motor:
# 1-01010 Controller:
# 33 1419 Propeller:
# 33 2308 Driver with spinner, for Ø 4 mm shafts,
8 mm propeller hole
# 31 6656 • Battery:
FunJet ULTRA 2
Approx. 875 g
Approx. 14.5 dm²
ROXXY BL Outrunner C35-36-1960kv
ROXXY BL Control 755 S-BEC
6"x5.5"
ROXXY EVO Lipo 4-2600M 40C
783 mm
750 mm
60 g/dm²
# 5 5010
# 5 5012
# 6 5118
# 11 2066
# 11 3065
# 11 3070
# 5 5811
# 31 8579
# 8 5417
# 8 5420
# 33 2355
# 1-00962
# 1-00996
# 1-01010
# 73 3195
# 33 2329
# 1-01025