Spartherm Selection Instrucciones De Montaje página 105

Passo M Trias L
Chopped wood Chopped wood
7 kW 7 kW
2.2 kg/h 2.1 kg/h
5.2 – 9.6 kW 4.9 – 9.1 kW
< 80 % > 80 %
3
< 1250 mg/Nm < 1250 mg/Nm
3
< 40 mg/Nm < 40 mg/Nm
279 °C 360 °C
0.12 Pa 0.12 Pa
6.32 g/s 5.2 g/s
60 kg –
from 165 kg 200 kg
165 165
95 95
65 65
100 130
840 100
500 500
840 800
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
Subject to alterations and errors
Piko /
Cubo S / L
Chopped wood Chopped wood
5.9 kW
1.8 kg/h
4.5 – 7.7 kW
< 80 %
3 3
< 1250 mg/Nm < 1250 mg/Nm
3 3
< 40 mg/Nm < 40 mg/Nm
325 °C
0.12 Pa
4.9 g/s
–
from 160 – 200 kg
124
73
48
100
100
500
800
yes
yes
yes
yes
yes
yes
yes
yes
yes
Piko / Piu
Cubo M
Chopped wood
6 kW 7 kW
1.8 kg/h 2.1 kg/h
4.5 – 7.8 kW 4.9 – 9.1 kW
< 80 % > 79 %
3 3
< 1250 mg/Nm
3 3
< 75 mg/Nm
330 °C 376 °C
0.12 Pa 0.10 Pa
5.1 g/s 7.9 g/s
– –
165 kg 210 – 245 kg
124 165
73 95
48 65
100
100
500 500
800 800
yes yes
yes no
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
APPLIANCES WITH WATER SYSTEM
CONNECTIONS
The water system connections are located
on the rear at the bottom.
Technical data SENSO M H O
2
Water heating output approx. 5.0 kW*
Permissible operating overpressure
Max. permissible supply flow temperature 1
Max. operating temperature
Minimum return temperature
Water resistance at 650 l/h
Minimum flow rate for thermal discharge
safety device
Water capacity approx. 17 litres
* The values given represent the average
value across the whole length of the fire.
These values are the results recorded under
test conditions, when a volume of firewood of
approx 2.2 kg is burnt per hour.
1
The thermal discharge safety device inte-
grated into the heating system will trigger at
an inlet temperature of approx. 95 °C!
GB
3.0 bar
105 C°
95 C°
60 C°
18 Pa
900 litres