MPM MMK-06M Manual De Instrucciones página 15

6. In order to start the appliance press and hold down the cover (2). After releasing the cover the ap-
pliance is switched off. Press the cover at intervals (alternately press and release) and the appliance
will work in a pulsating manner. The pulsating manner provides optimal grinding.
7. After grinding unplug the appliance, take off the cover, pour out the ground or chopped products,
remove the container and clean the inside.
ATTENTION! Before removing the cover wait until the blades stop rotating!
NOTE! The motor should not work for more than 30 seconds at a time. After this time switch off
the appliance for at least 1 minute. Regularly remove any residues from the appliance.
CLEANING AND MAINTENANCE
ATTENTION! Always unplug the appliance before cleaning.
Do not immerse the appliance base, its cord and plug in water. This may cause electric shock or
fire.
Cutting surfaces of the blades are very sharp. Danger of injury! Take particular care while using
the blades!
1. Wash the cover and both containers by hands and then dry completely.
2. Wipe the housing with damp cloth and then dry completely.
3. Do not use acute cleaning agents since they may cause scratch or other damage.
4. Before reassembling the appliance, thoroughly dry the grinder parts.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Length of power cord: 0.93 m
NOTE! MPM agd S.A. company reserves the right to technical changes.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
15