EN
- Children shall not play with the appliance (including the acces-
sories).
- This appliance shall not be used by children. Keep the appliance
and its cord out of reach of children (including the accessories).
- Before starting the appliance make sure the container is properly
mounted on the base.
- Store the appliance and its cord out of reach of children un-
der 8 years of age.
- Before replacing accessories switch off and unplug the appliance.
- Do not pull the plug by holding the power cord.
- Do not connect the power plug with wet hands.
- The appliance has a protection which prevents starting it with-
out the cover.
- Keep your children safe: do not leave any parts of the pack aging
readily accessible (i.e. plastic bags, cardboard boxes, polystyrene
inserts, etc.).
- WARNING! Never let children play with plastic film or bags.
Choking/ asphyxiation hazard!
DESCRIPTION OF THE APPLIANCE
1.
Housing - base of the grinder
2.
Cover
3.
Stainless steel grinding container
a. with 2 stainless steel blades
b. with 4 stainless steel blades
USING THE APPLIANCE
1. Before using the appliance check if it is unplugged.
2. Place the appliance on a dry, stable surface.
3. Hold the housing (1) with one hand and assemble the grinding container (3a or 3b) with the other
hand. Press the container to the base and block it by turning it clockwise. Make sure to properly
mount the container on the appliance base.
Pour suitable products for grinding, depending on which type of containers with blades
is used. Remember not to exceed the MAX indicator on the inside of the container.
- The container with two blades (3a) is used to grind coffee (about 70 g).
- The container with four blades (3b) is used to chop, e.g. herbs, nuts, onion, dried fruit, garlic etc.
4. Hold the housing (1) with one hand, put on the cover (2) with the other.
5. Plug in the appliance.
NOTE! The grinder has a protection which prevents starting it without the cover.
ATTENTION! Do not add water or any other liquid to the grinding containers.
ATTENTION! Before starting the grinder make sure the container is properly mounted on the
base.
14
4.
Power cord
5.
Non-slip rubber feet
6.
Place for coiling power cord
7.
Protection against running without
cover