Hilti GFB 6X-A22 Manual De Instrucciones Original página 22

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held, cordless band file. It is designed for grinding and polishing metallic
surfaces in awkward places, without use of water.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Possible misuse
Do not use the product for wet grinding.
Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).
3.4 Items supplied
Band file, side handle, file arm, Torx wrench, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
3.5 Temperature-dependent motor protection
The temperature-dependent motor protection system monitors current input and motor temperature and
thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure, the power tool's performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
3.6 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
16 English
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Eccentric screw
Locking screw for swivel arm
Lockable on/off switch
Adjusting knob for speed
Battery
Battery release button
Dust filter
Grip
Casing cover
Drive roller
Securing screws for file arm
File arm
Adjusting screw for file arm
Abrasive belt
Contact roller
2241313
*2241313*