SNOWJOE sunjoe SPX2700-MAX Manual Del Operador página 13

Idiomas disponibles

Idiomas disponibles

• Store the machine and accessories in a room that does
not reach freezing temperatures.
• Do not store near a furnace or other sources of heat that
may dry out the pump seals.
• Operate the pressure washer with non-corrosive/non-toxic
anti-freeze, a pump saver, or a pump protector before
storing for the winter.
m
WARNING!
Before reusing, completely flush the
unit out with clear water. Anti-freeze products can damage
paintwork, so you must ensure there is no anti-freeze left in the
system before using it again.
Maintenance
m
CAUTION!
Before working on the pressure washer,
disconnect the plug from the power supply socket.
Clean the Adapter Filter and the Nozzle
1. To ensure good performance, check and clean the adapter
filter (Fig. 25). Remove the filter and rinse with warm water
to prevent any foreign matter from clogging the pump
(Fig. 26).
Fig. 25
Garden hose
adapter
Adapter filter
Fig. 26
Filter
2. Clean the nozzle with the needle clean-out tool provided
(Fig. 27). Remove the nozzle from the spray wand; remove
any dirt from the nozzle hole and rinse.
Fig. 27
Disposal
Recycling the Pressure Washer
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
Service + Support
If your Sun Joe
SPX2700-MAX electric pressure washer
®
requires service or maintenance, please call the Snow Joe
Sun Joe
customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S P X 2 7 0 0 - M A X
Serial #:
13
Needle clean-out tool
+
®
loading