Vox EBC410DBR1 Manual De Instrucciones página 20

There are ventilation holes around outside of the hob. YOU MUST ensure these holes
are not blocked by the worktop when you put the hob into position.
Be aware that the glue that join the plastic or wooden material to the furniture,

has to resist to temperature not below 150℃, to avoid the unstuck of the
paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to

withstand an temperature of 90℃.
8.2 Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after
installation.
A B C
screw bracket Screw hole
Adjust the bracket position to suit for different work surface's thickness.
HOB
D
base
TABLE
BRACKET
A
A
B
C
D
HOB
20
TABLE
BRACKET
B