Configuration Center - Bosch DCU 130 Instrucciones De Funcionamiento

en 28 | DCU 130 | Software-Tools
6. Software-Tools
6.1

Configuration Center

The "Configuration Center" is the central application
permitting collective access to the configuration tools.
The integrated tools are represented by symbols similar
to those in the control panel.
i
Each of the applications can be called up by way of a
double click or pressing the enter key E. The device
type, firmware and BIOS version, hardware revision
and serial number of the device are displayed on the
information page.
¶
Double click on "Start >> Control panel >> Configu-
ration Center".
6.1.1 Battery
The "Battery Information and Diagnosis Tool" applica-
tion is used to display current information on the two
batteries.
Energy status
The "Energy status" tab shows the statuses of the up-
per (battery 2) and lower (battery 1) batteries. The
lithium-ion batteries are charged alternately when the
power supply unit is connected. Charging progress is
displayed on the right for the two battery slots. The left
status display shows the remaining battery operating
time.
|
1 689 989 091 2014-05-14
Status details
The "Status details" tab lists all the data of the "Ener-
gy status" tab in table form.
Static data
The "Static data" tab shows all the detailed information
such as the manufacturer and capacity of the lithium-
ion battery.
Diagnosis
The "Diagnosis" tab provides information on correct
functioning and the number of lithium-ion batteries
used.
6.1.2 Front key illumination
The illumination of the front keys can be set using the
selection list:
on front key illumination switched on.
off front key illumination switched off.
6.1.3 Softkeyboard
The "Softkeyboard" application is used to alter the
settings (e.g. language, layout...) of the virtual screen
keypad.
6.1.4 Screen Mob
The purpose of the "ScreenMob" application is to deac-
tivate the touch screen for one minute to permit safe
cleaning.
i
ScreenMob can also be called up by way of the front
key combination "Change task + right mouse key".
Robert Bosch GmbH