Idiomas disponibles
Idiomas disponibles
• Once you have found the correct position, tighten the fork fixing screw (8).
5.4
DISPLAY OPERATION
5.4.1
SWITCHING ON THE APPLIANCE
The first time the appliance is started up, it is set up with the factory settings. For
subsequent start-ups, it maintains the settings prior to the last shutdown.
When turned on, the display loads the firmware and prepares for dispensing.
5.4.2
DOSE DISPENSING AND ADJUSTING (DISPLAY)
• Hold the dose 1 button (15)
moments in order to choose the dose to dispense (the button selected will light up).
• By pressing the chosen dose button again, or the grinding start button (7), coffee
dispensing is activated and the time display (10) counts down to zero.
• Once dispensing has been completed the grinding time returns to the set value. The
dose counter (single or double) is increased by 1.
• Press the buttons (12)
time of the selected dose (time visible in seconds on the display).
• If buttons (12)
is automatically increased or decreased for the time it is held down.
• To pause the automatic dispensing before the grinding time is over, press the dose
button on the display, or with the filter holder the grinding start button (7). To resume
dispensing for the remaining time, press the dose button on the display again or the
grinding start button (7). Hold the button down for the dose selected (flashing) to end
dispensing. The grinding time will return to the set value.
5.4.3
CONTINUOUS DISPENSING
Press the buttons for dose 1 (15)
The following symbol appears (11)
the buttons are released or for the maximum duration, 50 seconds.
To come out of the continuous dispensing mode release the dose 1 button (15)
and the button for dose 2 (16)
28
or the dose 2 button (16)
and (13)
or (13)
are held pressed down for a few moments the time
and dose 2 (16)
on the display and dispensing will continue until
.
to increase or decrease the dispensing
.
EN
down for a few
