Oster POGGM91101G Manual De Instrucciones página 28

Idiomas disponibles

Idiomas disponibles

COUNTERTOP INSTALLATION
Prior to Installation
Remove all packing material and accessories. Examine the oven for any damage such as
dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to protect the
magnetron.
Installation
Select a level surface that provide enough open space for the intake and/or outlet vents.
12 inch(30cm)
OPEN
3.0 inch(7.5cm)
3.0 inch(7.5cm)
1) The minimum installation height is 85cm.
2) The rear surface of appliance shall be placed against a wall. Leave a minimum clearance
of 30cm above the oven, a minimum clearance of 20cm is required between the oven and
any adjacent walls.
3) Do not remove the legs from the bottom of the oven.
4) Blocking the intake and/ or outlet openings can damage the oven.
5) Place the oven as far away from radios and TV as possible. Operation of microwave
oven may cause interference to your radio or TV reception.
6) Plug your oven into a standard household outlet. Be sure the voltage and the frequency
is the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If
installed near or over a heat source, the oven could be damaged and the warranty would be
voided.
La superficie accesible puede estar caliente durante el funcionamiento
English-9
loading