Important instructions for safety and environment
Steam will cause short circuit or electric shock
since it would get into contact with the electrical
parts in the refrigerator!
• Do not use mechanical devices or other methods
to accelerate the defrosting process, other than
those recommended by the manufacturer.
• Never use the parts on your refrigerator such as
the door and drawer as a means of support or
step. This will cause the product to tip over or
parts of it get damaged.
• Do not damage the cooling circuit, where the
refrigerant is circulating, with drilling or cutting
tools. The refrigerant that might blow out when
the gas channels of the evaporator, pipe exten-
sions or surface coatings are punctured may
cause skin irritations and eye injuries.
• Do not cover or block the ventilation holes on the
refrigerator with any material.
• Place the beverage with higher proofs tightly
closed and vertically.
• Do not use gaseous sprays near the product
since there is the risk of fire or explosion!
• Flammable items or products that contain flam-
mable gases (e.g. spray) as well as the explosive
materials should never be kept in the appliance.
• Do not place containers filled with liquid on top
of the product. Spilling water on an electrical
component may cause electric shocks or risk of
fire.
• Do not store products (vaccines, heat-sensitive
medicines, scientific materials and etc.) that
require a precise temperature control in the
refrigerator.
• If you will not operate the product for a long
period of time, unplug and unload the food in it.
• If the product is equipped with blue light, do not
look at the blue light with optical tools.
• Exposing the product to rain, snow, sun and
wind is dangerous with respect to electrical
safety.
• In products with mechanical control (thermo-
stat), wait for minimum 5 minutes to plug in the
product again after unplugging it.
• Do not overload the product. It may fall when
the door is opened, and cause injury or damage.
Similar problems may occur in case of putting
things on top of the product.
• If the product's door is equipped with a handle,
do not pull by the handle when changing the
place of the product. Handle may get loose.
• Pay attention not to have your hand or any part
of your body get caught by the moving parts
inside the product.
1.1.1 HCA warning
• If your product's cooling system contains R600a:
This gas is flammable. Therefore, pay attention
to not damaging the cooling system and piping
during usage and transportation. In the event of
damage, keep your product away from potential
fire sources that can cause the product catch a fire
and ventilate the room in which the unit is placed.
Ignore this warning if your product's cooling
system contains R134a.
Type of gas used in the product is stated in the
type plate which is on the left wall inside the refrig-
erator.
Never throw the product in fire for disposal.
C
If the product is equipped with a cooling
system containing R134a gas, ignore this
warning.
C
You can learn the gas used in production of
your product on the rating plate located on
the left inner part of it.
A
WARNING:
in fire.
1.1.2 For products with a
water dispenser
• Pressure for cold water inlet shall be maximum
90 psi (620 kPa). If your water pressure
exceeds 80 psi (550 kPa), use a pressure
limiting valve in your mains system. If you do
not know how to check your water pressure,
ask for the help of a professional plumber.
• If there is risk of water hammer effect in
your installation, always use a water hammer
prevention equipment in your installation.
4 /33 EN
Never dispose the product
Refrigerator / User Manual