Overcasting Stitch; Multiple Zigzag Stitch; Seam Finishing; Mending - Sears Kenmore 385.15343 Manual De Instrucciones

Overcasting Stitch
Stitch pattern selector: H, I
Presser foot: Zigzag foot
(_ Needle thread tension: 1 to 4
H I
®
This stitch is useful in garment construction, and in finishing
the raw edges of any sewing project.
Start overcasting about 1/8"(0.3 cm) inside the raw corner
of a fabric. The right tip of the stitch should just clear the
row edge.
u
Multiple Zigzag Stitch
(_ Stitch pattern selector: J
_) Presser foot: Zigzag foot
Needle thread tension: 1 to 4
j \
® Seam finishing
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker.
Place your fabric to allow a 1.6 cm (5/8") seam.
Trim the seam allowance after sewing.
Note • Be careful not to cut the stitches.
,, Mending
Position the tear under the needle, so that the stitch
catches both sides.
f
"2-,
J
48