Beurer UB 100 Instrucciones Para El Uso página 18

Ocultar thumbs Ver también para UB 100:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
CAUTION
• Note that the heated underblanket must not be dry-cleaned, wrung out, machine dried or ironed.
The heated underblanket is machine washable.
Set the washing machine to a particularly gentle, 30°C cycle (woolens programme). Use a mild detergent
with dosage according to the manufacturer's instructions.
CAUTION
• Note that the heated underblanket will suffer from too frequent washing.
For its entire life, therefore, the heated underblanket should be washed not more than 5 times in a
washing machine.
While the heated underblanket is still damp after washing, shape it to its original form and size and place it
flat over a clothes drying rack to dry.
WARNING
• Do not attach the heated underblanket to washing lines with washing pegs or the like.
Otherwise the heated underblanket may be damaged.
• Only reconnect the switch to the heated underblanket after the connector and the heated
underblanket are completely dry. Otherwise the heated underblanket may be damaged.
• Under no circumstances switch on the heated underblanket to dry it. Otherwise there is a
risk of an electric shock.
6. Storage
When not in use we recommend to store the heated underblanket in its original packaging. For this purpose,
disconnect the controller from the electric underblanket by unplugging the plug-in coupling.
CAUTION
Allow the heated underblanket to cool down before folding. Otherwise
the heated underblanket may be damaged.
Do not crease the heated underblanket by placing items on top of it
during storage.
7. Disposal
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Elec-
tronic Equipment). If you have any queries, please contact the appropriate local authorities.
8. In the event of problems
Problem
Cause
Display does
The mains plug is not connected to the
not light up/no
socket and/or not switched on.
display.
The safety system switches off the
electric underblanket.
"E1" appears on
The switch is not properly connected
the display.
to the electric underblanket.
9. Technical data
For technical data, see the type plate label on the electric underblanket.
Solution
Connect the mains plug and switch on the
electric underblanket.
Send the electric underblanket to customer
service.
1. Switch off
2. Connect the plug-in coupling correctly
3. Switch on
18
loading

Este manual también es adecuado para:

Ub 90