Steam cycles
Refresh
Wrinkle Away
Available options
You can view the currently selected options for the selected cycle and change them in the
Option pane of the Cycle Selection screen. There are four options, Dry level, Temperature,
Time, and Extras.
Dry level
Tap this option to change the currently selected dry level setting. The available dry level settings
are Damp dry, Less dry, Normal dry, More dry, and Very dry. However, depending on the
selected cycle, some of these options will be disabled.
Temperature
Tap this option to change the currently selected temperature setting. The available temperature
settings are Extra Low, Low, Med Low, Medium, and High. However, depending on the
selected cycle, some of these options will be disabled.
Time
Tap this option to change the currently selected time setting. The available time settings are
Automatic, 20 min, 30 min, 40 min, 50 min, and 60 min. The Time option cannot be changed
in the Sensor Dry cycles and Steam cycles. You can set the Time option in the Manual Dry
cycles only.
Extras
Tap this option to add extra cycles to or remove extra cycles from the selected cycle. The
available extra cycles are Rack dry, Wrinkle prevent, and Mixed load bell. However,
depending on the selected cycle, some of these extra cycles will be disabled. Tap each enabled
extra cycle to add it to or remove it from the selected cycle.
DV457E(G)-02836E-03_EN.indd Sec3:33
DV457E(G)-02836E-03_EN.indd Sec3:33
The Refresh cycle is best for smoothing out wrinkles and reducing odors
in loads of one to four items.
The Wrinkle Away cycle removes wrinkles from clothes stored in closets,
etc. It provides wrinkle release via optimized steam care. You can
change the drying time. (Minimum time : 20 minutes)
For best results, load no more than 3 items.
Rack Dry - Rack Dry is available in the Time Dry cycle. the temperature is only set to
Extra Low.
RACK DRY is for items, such as washable sweaters and lingerie that should dry
fl at and and also can be used with items such as stuff ed toys that should not be
tumbled.
Wrinkle prevent - Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling. The
load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Mixed load bell - The mixed load bell that notifi es you when the average dry level
in a load is damp dry (80 % dried).This lets you take garments that you don't want
fully dried or that dry quickly out of the dryer early while letting others continue to dry.
You can select this function in all Sensor Dry cycles except Wool, Sanitize, and Active
Wear. The dry level selections are limited to Normal Dry, More Dry, and Very Dry.
Drying a load of laundry _33
2012-12-04
2012-12-04
6:44:43
6:44:43