LG LDF8764ST Manual Del Propietário página 11

CONTROL PANEL
Display varies by model (LDS5774)
Cycle Options
Press the desired cycle and then select the options for that
cycle.
Extra Dry ( )
Select the Extra Dry option for better drying performance.
This option adds 60 minutes of extra drying time to the cycle.
The Extra Dry button will illuminate when the option has
been selected.
Press and hold the Rinse and Spray buttons for three seconds.
Rinse
Repeated pressing of the Rinse button will select the desired
Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra
Rinse lights will show in the bottom left portion of the dis-
play.
Sanitary (
)
This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dish-
washers. Certified dishwashers are not intended for licensed
food establishments.
Extra Rinse ( R )
+
The Extra Rinse symbol indicates that an extra rinse has been
added to the cycle. An extra rinse can help reduce hard water
spotting on dishes. To add an extra rinse, press the Rinse but-
ton repeatedly until the Extra Rinse symbol appears in the
display.
Spray (INTENSITY)
First, select the desired cycle. Press the Spray button repeat-
edly until the desired spray intensity is selected.
Soft ( ), Medium (
Half Load ( )
For small loads, you may use just the upper or lower rack to
save energy. Each press of the Half Load button cycles be-
tween upper rack only and lower rack only.
), Strong ( )
PARTS AND FEATURES
Delay Start
The Delay Start feature allows you to delay the start of a se-
lected cycle. Each time the Delay Start button is pressed, the
delay time will increase an hour. The delay start time can be set
from 1 to 19 hours, in one-hour increments.
Child Lock
The Child Lock feature helps prevent your settings from being
changed during a cycle. Selecting this feature locks all of the
buttons, except for the POWER button, on the control panel.
This feature does not lock the door.
To activate the Child Lock:
1. Press the POWER button.
2. Select the cycle (and desired options).
3. Press and hold the Half Load and Delay Start buttons for
three seconds. The Child Lock indicator will illuminate in
the display once the Child Lock is activated.
4. Close the door to begin the cycle.
Digital Display
The Digital Display on the control panel shows the ESTIMATED
cycle time. When the dishwasher is powered up, the display
will be blank. When the cycle and options are selected, the
display will show the total estimated time to complete those
selections. During operation, the display shows the remaining
estimated operating time.
NOTE
• The estimated time shown in the display does not in-
clude delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay
time in hours.
• Time may vary depending on the soil level of your load.
POWER
• Press the POWER button to turn on the control panel. If no
cycle is selected within four minutes, the dishwasher will
power off.
• After the cycle is complete, the power automatically turns
off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any
kind, the PF indicator will display and power will be auto-
matically turned off for safety. The cycle will need to be re-
started.
Smart Diagnosis
Should you experience any problems with your dishwasher, it
has the capability of transmitting data to your Smart Phone
using the LG Smart Laundry & DW Application or via your tele-
phone to the LG call center.
11