Orbegozo HO 232 A Manual De Instrucciones página 18

Idiomas disponibles

Idiomas disponibles

HO 232 A
The oven is provided also with the following accessories and elements:
- Wire rack that can be placed in one of the slots provided
- Bake tray that can be placed in one of the slots provided
- Crumb tray that can be placed at the bottom to distribute lower heat uniformly
- Pilot light: on when resistances are working
WHEN USING FOR THE FIRST TIME
Before being used for cooking, the appliance should be switched on "empty" to eliminate the "smell of
new" and any oils remaining from the production process. Insert the plug in the power socket, turn
thermostat to "max", turn the timer knob to position "20", position the selector
knob and
leave the appliance on. When the cycle ends, remove the plug from the socket and wait until the
appliance is cool before removing the accessories. These must be washed in hot water with normal
dishwashing liquid, rinsed and dried before being returned to their position.
USING THE OVEN
Generally speaking it is not necessary to preheat the oven, but for some foods (meat, pastries) it is
advisable to preheat the oven as described above, making sure the door is closed properly.
Put the shelf grids or/and enamel baking tray at the desired height in the slots in the oven.
• Place the enamel tray at the bottom of the oven.
• Put the food (in the plate or baking tray, etc.) and shut the door.
• Follow these instructions:
- Insert the plug in the power socket
- Turn the thermostat knob clockwise to the temperature required
- Turn the selector switch to desiderate position
- Turn the timer knob to the time required: the pilot light and the oven starts to heat: if cooking time is
not sufficient, restart the timer for the time still required.
When cooking is completed, turn the selector switch to
,
the thermostat to "0" and remove
the plug from the power socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch it off, remove the plug from the outlet and wait for it
to cool.
• To clean the outer surface always uses a soft cloth slightly damp with water only. For oven cleaning
(shelf grids and enameled baking tray), use a slightly moist soft cloth; do not use metal pads or
abrasive products. Do not wash it under running water, submerge it in water, or place it in a
dishwasher. Before using the appliance, make sure that it is perfectly dry, especially the contacts.
• Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
18
loading