Idiomas disponibles
Idiomas disponibles
– Presence key
PROGRAMMING
When programming, the regulator cover should be open.
You can set or display the following values:
• Temperature
• Heating program
• Day of the week and time
• Current values
• Vacation days
• Return to default values
– Temperatures regulation
28
The chosen condition is permanent in manual mode
NOTE 1:
valid until the next switching, according to the heating program.
If the button is pressed during reduced temperature operation, the system switches to
NOTE 2:
heating at the prescribed comfort temperature.
1
3
to
4
1 0
to
11
12
to
13
15
to
16
17
Before proceeding to correct the temperature on the regulator, the eventual thermostatic
valves should be adjusted to the desired temperature.
In automatic mode the unit switches between prescribed temperature and reduced tempera-
ture, according to the temporary heating program set.
Prescribed temperature
1
temperature when rooms are occupied (base setting)
Reduced temperature:
2
temperature during absence periods or night
Domestic water temperature:
3
desired temperature for domestic water
(for regulators provided with domestic water function, only).
If the rooms are unused for a long time, you can reduce the tempe-
rature by the presence key, and save energy.
When the rooms are occupied again, operate again the presence
key, to warm the rooms again.
The current choice is showed on the display.
Heating at prescribed temperature
Heating at reduced temperature
, while in automatic mode
is
As soon as the cover is open,
the display and the key functions
are switched.
The number in the border indi-
cates the lines of the program
that can be selected by keys
and
.
