Idiomas disponibles
Idiomas disponibles
OPERATION
During operation the cover of the regulator should remain closed.
– Select the operating mode
(Reference keys: grey)
– Info key
(Reference keys: grey)
– Temperature correction
Automatic operation: the heating operates in automatic mode, conforming to the
input heating program.
The program can be briefly excluded using the presence key.
Manual operation: the heating operates in manual way, according to the selection
of the presence key.
Stand-by: the heating is disabled. The anti-freeze protection is enabled.
NOTE: The above mentioned selections don't affect the heating of domestic water.
Day, time, ambient temperature
1...7
Day, time
External temperature*
NOTE: the ambient unit continues operating independently from the display.
Before proceeding to correct the temperature on the regulator, the eventual thermostatic
valves should be adjusted to the desired temperature.
If your apartment is too cold or too hot, you can easily correct the preset
temperature by the temperature selector.
If you turn the selector toward the + sign, the preset temperature
increases of about 1°C each step.
If you turn the selector toward the – sign, the preset temperature
decreases of about 1°C each step.
Before a new correction, wait until the temperature is stable.
NOTE: by the temperature selector is possible to correct the preset temperature only, while
the reduced temperature is unchanged.
The temperature is displayed only if the ambient temperature regulator operates in automatic
mode
or in manual mode
The desired operating mode is selected by
pressing the related key with the correspon-
ding symbol. The choice is evidenced by sym-
bol
Each time the info key is pressed, the following
reported values are displayed:
* These data are showed only if the related
probe is connected.
.
27
