Hu-Friedy SWERV3 Manual Del Usuario página 15

HELPFUL INFORMATION MODEL
INPUT
FUSES RATING
OUTPUT
WATER INLET PRESSURE 15 73 psi
SERIAL No.
The serial number of the SWERV
on the back of the control unit (Fig. 15). The first five digits of the serial
41MY
number indicate the type of equipment, its revision, and the month and
year it was manufactured.
TYPE REVISION MONTH
• Type: 1 = control unit
• Type: 1 = control unit
2 = handpiece
2 = handpiece
• Revision record: Shows by alphabet (A~)
• Revision record: Shows by alphabet (A~)
• Year: last 2 digits of production year. (00~99)
• Production month: A~L = (January thru December)
• Production month: A~L = (January thru December)
• Year: last 2 digits of production year. (00~99)
• Unit Numbers: Running Numbers (00001~99999)
WARRANTY — SWERV
Hu-Friedy, at its sole option, will repair or replace for a period of two years following the date of the first
purchase as new item, any SWERV
a result of a defect in materials or workmanship. Purchaser must return the defective Unit (postage prepaid)
and must provide Hu-Friedy with the warranty registration form or proof of purchase.
Excluded from this warranty are damages in cases of:
• the Unit having been used outside of normal operating conditions;
• the Unit being damaged in transit;
• the Unit having been modified;
• non-compliance with the manufacturer's installation instructions (water pressure, mains voltage);
• use with an electrical system that does not comply with regulations in force;
• uses other than those specified in this manual;
• non-compliance with instructions contained in this manual;
• service to the Unit being provided by non-authorized persons;
• components exhibiting normal wear from usage;
• damages/defects being caused by force majeure or any other condition that is beyond
the control of Hu-Friedy.
Repair service or replacement provided under the warranty neither extends the warranty period nor
begins a new warranty period. THE EXPRESS WARRANTIES DESCRIBED HEREIN ARE THE EXCLUSIVE
WARRANTIES AND ARE PROVIDED INSTEAD OF ANY WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EXCEPT
WARRANTIES OF TITLE AND INFRINGEMENT. EXCEPT AS SET FORTH HEREIN, DAMAGES FROM
BREACH OF SUCH WARRANTIES ARE LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF
THE PRODUCT, AT HU-FRIEDY'S SOLE OPTION. CONSEQUENTIAL OR INCIDENTAL DAMAGES
RESULTING FROM BREACH OF ANY APPLICABLE EXPRESS OR IMPLIED WARRANTIES ARE HEREBY
EXCLUDED.
Please contact Hu-Friedy for instructions on obtaining warranty service.
UM3000
100-240V 50/60Hz
90 VA
5X20mm 1.6A /250V FA
25 30kHz
3 Magnetostrictive Scaler is located
MEDICAL EQUIPMENT
UL 60601-1
CAN/CSA C22.2 NO 601.1
MADE IN USA
YEAR UNIT NUMBER
MAGNETOSTRICTIVE SCALER
3
3 Magnetostrictive Scaler ("Unit") (excluding the handpiece) that fails as
15
MODEL
INPUT
FUSES RATING
OUTPUT
WATER INLET PRESSURE 15 73 psi
SERIAL No.
41MY
TYPE REVISION MONTH
• Type: 1 = control unit
2 = handpiece
• Revision record: Shows by alphabet (A~)
• Year: last 2 digits of production year. (00~99)
• Production month: A~L = (January thru December)
SWERV
3
UM3000
100-240V 50/60Hz
90 VA
5X20mm 1.6A /250V FA
25 30kHz
MEDICAL EQUIPMENT
UL 60601-1
CAN/CSA C22.2 NO 601.1
MADE IN USA
YEAR UNIT NUMBER
13