Idiomas disponibles
Idiomas disponibles
SV 2210
SPRAYING
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that time, you should
keep enough water in the water tank.
STEAM IRONING
1. Use steam ironing, turn the steam control to minimum position and set the temperature control at
the ".", ".." or "..." position.
2. After the indicator goes out, turn the steam control to the suitable position, steam will be sprayed,
ironing can start.
BURSTING STEAM
Set the temperature control at the "..." position, then press down the bursting steam button, the base
plate will spray out bursting steam.
DRY IRONING
Turn the steam control to minimum position, set the temperature control to the suitable position, you
can dry ironing.
SELF CLEANING
Set the temperature control to the maximum position, press the self clean button for about 1 minter,
strong steam will be sprayed to clean the steam chamber. Use the function once every two weeks.
STORAGE
After using, pull out the plug, pour out the remaining water, turn the steam control to minimum, turn
the temperature control to "min", let the iron cool down, put the iron on the safe and dry place vertically.
ANTI-DRIP
The iron automatically stops steaming when the temperature is too low in order to prevent water
from dripping out of the soleplate.
12
