Care And Maintenance Instructions - ELLECI Max Serie Manual De Uso Y Mantenimiento

Central button function when faucet is turned off:
- If closed with hot running water , you get mixed water flow with the same flow rate prevously selected (Scald Protection)
- If closed with cold running water , you get cold water flow with the same flow rate previously selected
PROBLEMS, DEFECTS
The following is a list of the possible defects that can appear, their causes and the proposed countermeasures for resolving them:
Problem
No water running?
Water running constantly?
It does not divert?
Water Flow too low?
Water temperature cannot
be set?
Dripping?
Lime forming on the
electromixer?

Care and maintenance instructions

To maintain its beautiful appearance for a long time to come, we suggest you care as it follows: Bright chrome, velvet and colour coated surfaces are
sensitive to cleaning gents containing acids or abrasives as well as abrasive sponges.
ATTENTION !
Slight colour variations can occur with colour coated faucets as a result of unavoidable process variations.
MAINTENANCE
Dirt and surface calcination are best removed with soapy water, fellowed by rinsing with plain water and drying. Do not use disinfectants or cleaning
agents containing alcohol.
Careless treatment of faucets invalidates Elleci S.p.a. guarantee provisions.
Cause
- Filters/corner valves closed
- Filters/corner valves blocked
- Hoses twisted/kinked
- Power supplier / socket faulty
- Mains unit faulty
-Connecting cable/connection
between spray head and control box
faulty/damaged
- On/Off button faulty/blocked
- Electronics faulty
- Electronics faulty
- Areator blocked
- Sray head faulty
- Supply line pressure too low
- Filters/corner valves not opened enough
- Filters/corner valves blocked
- Electro-valve faulty
- Water supply failure or temperature
difference between hot and cold water
suppl line too low
- Filters/corner valves dirty
- Electronics faulty
- Spray head control pad faulty
- Electronics faulty
- Water contains high level of lime
COLOUR COATED SURFACES REQUIRE EXTRA CARE URING INSTALLATION AND USE.
- Open filters/corner valves.
- Clean filters/corner valves.
- Connect hoses correctly.
- Check voltage supply andsocket.
- Replace mains unit.
lead - Check connection and ifnecessary call customerservice.
- Check ON-button
- Contact customer service
- Turn the faucet OFF and ON again. If problem persists call customer
service.
- Clean areator.
- Replace spray head.
- Check supply line.
- Open filters/corner valves further .
- Clean filters/corner valves
- Contact customer service.
- Check water supply.
- Clean filters/corner valves.
- Contact service.
- Replace spray head.
- Turn the faucet OFF and ON again. If problem persists call customer
service.
- Clean faucet, spray head and face plate after use and rub dry.
Solution
EN
37