EN
Water load/drainage ultrasonic wash basin.
1) The water loading is activated by pushing the button indicated in the figure;
time of 45 sec.
2) You can deactivate the device at any time.
3) The drainage of the wash basin is activated by pushing the button indicated in the figure
16. Food Waste Disposer (Optional)
1) Turning on/Turning off = push the button indicated in the figure.
2) You can deactivate the device at any time.
a) When using the Food waste disposer, water begins flowing 5 sec. before the motor starts.
b) After turning the motor off, water will continue to flow for another 20 sec. You can interrupt the flow by pushing the Food waste disposer
button again.
BE SURE THAT THE USE OF THE FOOD WASTE DISPOSER IS ALLOWED BY LOCAL AUTHORITIES
17. Electronic mixer (Optional)
ATTENTION!
Installation dimensions
34
• BEFORE USE THE FOOD WASTE DISPOSER REMOVE THE
• DO NOT INSERT SOLID OR FIBROUS MATERIALS
• ENSURE THAT WATER IS FLOWING WHEN USING THE
ATTENTION!
• THE FOOD WASTE DISPOSER SHOULD NOT RUN WI-
• FLUSH PIPES WELL BEFORE INSTALLING ELECTROMIXER
• PLEASE OBSERVE ANY RECOGNIZED GENERAL TECHNICAL RULES
•DRAIN SYSTEM COMPLETELY IN DANGER OF FROST
once activated, it remains on for a maximum length of
CLOSING CAP
FOOD WASTE DISPOSER
THOUT WATER
The thermal circuit breaker located on the back of the
food waste disposer.
Once turned on, it remains on for 20 min max.
IMPORTANT