Idiomas disponibles
Idiomas disponibles
OPERATION for electronic unit
Control panel
1. 'Set temperature' indicator
2. 'Room temperature' indicator
3. Low ventilation indicator
4. High ventilation indicator
5. Automatic mode indicator
6. Cooling mode indicator
7. Fan mode indicator
8. Heating mode indicator
(For ARP-1000DE and ARP-1000DM models only)
9. Timer operation indicator
10. Compressor operation indicator
11. Sleep function indicator
Turning ON/OFF
Press ON/OFF button, the unit will start automatically. If the ambient temperature is
o
- Higher than 75
F / 24
o
- Higher than 68
F / 20
o
o
- Below 68
F / 20
C, the unit will work in heating mode (Only for units ARP-1000 DM/DE and ARP-900 DM/DE)
Indicators of the functions in progress will be lit. *NOTE: The COMPRESSOR indicator will only light up when the compressor is in operation.
The display window shows the ambient room temperature.
To turn the unit off, press the ON/OFF button again.
Setting mode/function
Press MODE button to select required working mode: automatic, cooling, fan or heating,
(heating is only available for units ARP-900DE and ARP-900DM). The indicator of your selected mode will be lit.
Auto mode is factory preset at 75 degrees. When in auto mode(auto and cool light illuminated) the temp up and temp down buttons are
disabled and you cannot set a desired temperature. If you want a desired temperature above or below 75 run unit in cool mode and set your
desired temperature by pressing the temp up or temp down buttons.
All manuals and user guides at all-guides.com
FIG.18
o
C, the unit will work in cooling mode.
o
o
C, but below or equal to 75
F / 24
12. 'Temperature up' button
13. 'Temperature down' button
14. Speed (ventilation)button
15. Sleep button
16. Display window
17. Mode (function) option button
18. Timer button
19. ON/OFF (power) button
o
C, the unit will work in ventilation mode.
9
ARP-1000M / ARP-1000DM
ARP-1000E / ARP-1000DE
