Hoover UH71120 Manual Del Propietário página 10

Idiomas disponibles

Idiomas disponibles

4.8 Replace dirt cup lid and twist clockwise until locked in
position.
Replace dirt cup as described in Fig 4.5.
IMPORTANT
Allow filter to dry completely before replacing. Dry filter on
edge so air circulates on both sides of filter. This may take
up to 24 hours.
Cyclonic Filter Assembly: How to Clean
WARNING
!
To reduce the risk of personal injury - Unplug before
cleaning or servicing. Do not use vacuum without dirt
cup or filters in place.
Do not use vacuum without dirt cup or filters in place.
Remove dirt cup and twist the dirt cup handle
counterclockwise to open and remove lid as described in 4.6.
4.9 Pull filter assembly (G) out of dirt cup and remove.
4.10 Dirt and debris can be cleaned from the filter assembly
with the dusting brush.
4.11 Place the filter assembly on the dirt cup. Line up tabs
(H) on lid with dirt cup body.
4.12 Replace dirt cup lid and twist clockwise until locked in
position.
Replace dirt cup as described in Fig 4.5.
Exhaust Filter: How to Clean
4.13 With fingers under filter door lip, pull filter frame (A)
out and away from vacuum body. Hold filter over a trash
receptacle and tap out dirt and debris.
4.14 Bottom filter (B) must be pushed back into place first.
4.15 Then push the upper handle in (C) until it clicks.
4.16 Filter diagram: (B) bottom filter. (C) upper handle.
4.13
A
IMPORTANT
DO NOT RINSE OR WASH
THE EXHAUST FILTER.
Actual model may vary from images shown.
All manuals and user guides at all-guides.com
!
4.14
B
Exhaust Filter
When used and maintained properly, your Filter should not need
replacement within the warranty period. If desired, additional filter is
available at Hoover.com or call 1-800-944-9200. Ask for Hoover
No. 440005573.
4.8
4.9
G
4.11
H
WARNING
!
To reduce the risk of personal injury - Unplug before
cleaning or servicing. Do not use vacuum without dirt
cup or filters in place.
4.15
C
10
What to Buy:
Rinsable Filter
When used and
maintained properly, your
Rinsable Filter should not
need replacement within
the warranty period. If
desired, additional filter is
available at Hoover.com or
call 1-800-944-9200. Ask
Part No.
for Hoover
®
304087001.
4.10
4.12
!
4.16
C
B
Part
®
loading