Idiomas disponibles
Idiomas disponibles
Performance testing conducted by NSF International. This system has been tested according to NSF/ANSI 42 and 53
for reduction of the substances listed. The concentration of each of the indicated substances in water entering the
systems was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as
specified in NSF/ANSI 42 and 53.
System tested at 60 psig (414 kPa) using a minimum flow rate of 0.58 gpm (2.19 L/min).
Testing was performed under standard laboratory conditions. The contaminants or other substances removed or
reduced by this water treatment system are not necessarily in all users' water. Filter performance may vary based on
local water conditions.
The Brita
®
Faucet Filtration System is not intended to purify water. Do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst
reduction may be used on disinfected waters that may contain filterable cysts. Individuals requiring water of special
microbiological purity should follow the advice of their physician or local health officials regarding the use and
consumption of their tap water and Brita water.
Brita
Faucet Filtration System Specifications
®
Capacity:
Service Flow Rate:
94 gallons
0.58 gpm
(355 liters)
(2.19 L/min)
Please refer elsewhere in this User's Guide for the proper installation, conditioning, use and care requirements and
an explanation of how the filter replacement indicator functions. Maintenance according to the manufacturer's
instructions is essential for proper filter performance. Filter life should not exceed 94 gallons. If a decrease in flow
rate is noticed, replace the filter earlier. Replacement filters (model FR-200) are available in one, two and three packs
with an approximate retail price of US$15 per filter/CAN$18 per filter.
The Brita
®
Faucet Filtration System has been tested and certified by NSF International
against NSF/ANSI Standards 42 and 53 for the reduction of the claims specified on the
Performance Data Sheet.
The Brita
®
Faucet Filtration System has been tested and certified by the WQA against
NSF/ANSI Standards 42 and 53 for the reduction of the claims specified on the
Performance Data Sheet.
Distributed in U.S.A. for: Brita LP, 1221 Broadway, Oakland, CA 94612; 1-800-242-7482
Distributed in Canada by: Brita Canada Corporation, 150 Biscayne Crescent, Brampton, ON L6W 4V3; 1-800-387-6940
FOR PURCHASES MADE IN IOWA: This form must be signed and dated by the buyer and seller prior to the
consummation of this sale. This form should be retained on file by the seller for a minimum of two years.
BUYER:
Name
Address
Signature
Date
All manuals and user guides at all-guides.com
Model OPFF-100 with Filter FR-200
Working Pressures (min./max.):
20 psig/100 psig
(138 kPa/689 kPa)
(1.4 kg/cm
2
/7.0 kg/cm
2
)
SELLER:
Name
Address
Telephone Number
Signature
Date
10
Filtered Water
Electrical Requirements:
Temperature (min./max.):
None
34°F/100°F (1°C/38°C)
