Optical (Led) Signals - Reiner speed-i-Marker 940 Manual De Instrucciones

speed-i-Marker 940 speed-i-Marker 940

4.3 Optical (LED) signals

When the LED indicator flashes orange, you will find a detailed error analysis in the
PCset GRAPHIC software.
There you will also see the current rechargeable battery level and the current colour
reserves of the ink cartridge.
LED indicator
Green
Orange
(Warning)
Orange
(Warning)
Orange
(Warning)
Orange
(Warning)
Orange
(Warning)
Red (error)
46
Status Cause
Operational
Flashing - defective ink
once cartridge or no
ink cartridge
- Wrong cartridge
- Ink-level mis-
indication
- Ink cartridge is
not inserted
correctly
- Rechargeable
battery empty
- No rechargeable
battery / faulty
rechargeable battery
Flashing - Ink cartridge
twice almost empty
- Print speed is
not ok
Flashing - Ink cartridge
3 times empty
Flashing - Lock is open
4 times
Flashing - Rechargeable battery
5 times almost empty / weak
capacity
Flashing - Device failure
once
Rectification Notes
- Insert ink The detailed cause
cartridge and rectification
can be determined
by the PCset
GRAPHIC software
with connected
- Insert ink car- speed-i-Marker 940.
tridge correctly
- Charge the
rechargeable
battery
- Insert/replace
rechargeable
battery
- Check imprint - also audible
signal
- Continuous move-
ment necessary
- Replace ink - Also audible
cartridge signal
- Close lock - Also audible
signal
- Charge / change - Also audible
rechargeable signal
battery
- Disconnect the - If the error
device for about persists after
10 seconds from restarting, the
the mains supply device must be
(rechargeable repaired.
batteries and USB
connection as
well).