Idiomas disponibles
Idiomas disponibles
Method B on the cupboard:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard. See pic 1
1 pcs cooker hood
4 pcs M4 screw nuts
2. Put the outlet to the cooker hood, then install the cooker hood on the bottom of the cupboard, tighten the
cooker hood with 4 screws(M4×35mm) , M4 screw nuts, and 8 pcs flat washers.
3. Fix the expansion pipe on the oulet with cable tie, lead the expansion pipe to the outdoor. Note: the expansi-
on pipe is not supplied. See pic 2. If you use the indoor ventilation, you can cover the outlet by the outlet
cover and then open the indoor air ventilation. Note: the expansion pipe is not included in the product.
See pic 3.
pic 1
The parts required for step 2, 3
4 pcs Screws (M4×35mm)
8 pcs Flat Washers Ø4×20×1mm
[ EN ● 8 ]
Version: 3:0
KEN002DH 24.02.2021
