Viesta VDU6080SR Manual De Instrucciones página 11

Start Using Your Cooker Hood
Push button
1. Push stop button, and the motor will stop.
2. Push the low button, and the motor runs at low speed.
3. Push the middle button, and the motor runs at mid speed.
4. Push the high button, and the motor runs at high speed.
5. Push the light button and the two lights will come on. Push it again and the light will turn off.
Fault
Light on, but motor does not work
Light does not work, motor does not
work
Oil leakage
Lights not working
Insufficient suction
The Cooker hood inclines
OPERATION FOR VDU6080SR
TROUBLESHOOTING
Possible Cause
Fan switch turned off.
Fan switch failed.
Motor failed.
House fuses blown.
Power cord loose or disconnected.
One way valve and the outlet are not
tightly sealed.
Leakage from the connection of
chimney and cover.
Broken/Faulty globes
The distance between the cooker
hood and the gas top is too far
The fixing screw not tight enough
[ EN ● 11 ]
KEN002DH 24.02.2021
Solution
Select a fan switch position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit cord to power outlet.
Switch power outlet on.
Take down the one way valve and seal
with sealant.
Take chimney down and seal.
Replace globes as per this instuction
Refit the cooker hood to the correct
distance.
Tighten the hanging screw and make
it horizontal.
Version: 3:0