Campbell Hausfeld NB003008 Manual De Instrucciones De Operación
Campbell Hausfeld NB003008 Manual De Instrucciones De Operación

Campbell Hausfeld NB003008 Manual De Instrucciones De Operación

Clavadora de clavos de 3,18cm
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

see Warranty on page 10 for important information about commercial use of this product.
operating instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Tool Components and
Specifications . . . . . . . . . . . . . . . . . . . . .2
Operating Instructions . . . . . . . . . . . . .4
Lubrication . . . . . . . . . . . . . . . . . . . . .4
Recommended Hookup . . . . . . . . . . .4
Operational Mode . . . . . . . . . . . . . . .5
Single Sequential Mode . . . . . . . . . .5
Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7
Interchange Information . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . . . . . .10

Description

This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly . Features include: adjustable
exhaust, single sequential trigger, quick
clear nose, and an adjustable depth of
drive mechanism .

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit . Make sure
to tighten fittings, bolts, etc ., before
putting unit into service .
Campbell Hausfeld Tools meet or exceed Industries' Standards as set forth by the American National Standard
Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002 .
© 2009 Campbell Hausfeld/Scott Fetzer
1-1/4 inch Brad Nailer

safety Guidelines

This manual contains information
that is very important to know and
understand . This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS . To help
recognize this information, observe the
following symbols .
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NoTE: Information that requires special
attention .
important safety instructions
iNsTrUCTioNs pErTaiNiNG To a
risK of firE, ElECTriC sHoCK, or
iNJUrY To pErsoNs
should always be followed, including
the following:
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Danger indicates an
imminently
Model NB003008
Warning indicates a
potentially
Locate model and date code on
tool and record below:
Model No .: _____________________
Caution indicates a
potentially
Date Code: _____________________
Notice indicates
important
CaliforNia proposiTioN 65
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
When using tools,
materials such as wood,
basic precautions
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
NB003008
Retain these numbers for
future reference .
This product or
its power cord may
IN715401AV 6/09
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld NB003008

  • Página 21: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. IN715401AV 06/09 Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002 . 21-sp...
  • Página 22: Instrucciones De Seguridad

    Campbell Hausfeld si tiene alguna común cuando haga funcionar la y casco para las condiciones que se pregunta . herramienta. No use la herramienta apliquen .
  • Página 23: Uso Y Cuidado De La Herramienta

    NB003008 instrucciones de seguridad riesgo de atascarse y es más fácil de moviéndola a un nuevo sitio. Siempre vuelva a conectar la tubería de aire controlar . importantes (Continúa) DESPUÉS de cargar los sujetadores. No g . Verifique que las piezas móviles no No clave ningún...
  • Página 24: Conexión Recomendada

    Manual de Instrucciones de Operación instrucciones de seguridad b . Al realizarle un servicio a la importantes (Continúa) herramienta, utilice únicamente No use ningún tipo de gas piezas de repuesto idénticas. reactivo, incluyendo, pero no Use sólo piezas autorizadas. ADVERTENCIA limitado a, oxígeno y gases c .
  • Página 25: Modeo De Operación

    NB003008 iNsTrUCCioNEs DE si falla un regulador, o 10,34 bar, No use la herramienta si el mecanismo del elemento de contacto no está fUNCioNaMiENTo (Continúa) lo que sea mayor . Use mangueras funcionando adecudamente. Podría de aire de 9,5 mm (3/8 inch) para 1 .
  • Página 26: Para Cargar Y Descargar La

    Manual de Instrucciones de Operación iNsTrUCCioNEs DE 5 . Retire todos los fUNCioNaMiENTo (Continúa) sujetadores que estén trabados, utilizando Una herramienta unas pinzas o un que funciona de manera inadecuada no debe usarse. No destornillador si fuera necesario . active la herramienta a menos que esté 6 .
  • Página 27: Instrucciones De Uso Y

    O . este producto, comuníquese con el A cada anillo en O se le debe dar un concesionario de Campbell Hausfeld baño de lubricante para anillos antes de más cercano a su domicilio .
  • Página 28: Sujetadores

    Estos sujetadores para acabado de Campbell Hausfeld los puede comprar en su tienda más cercana . Si necesita ayuda para encontrar un artículo, comuníquese al 1-800-543-6400 . Los sujetadores de Campbell Hausfeld cumplen o exceden el estándar ASTM F1667 Modelo # Long.
  • Página 29: Guía De Diagnóstico De Averías

    NB003008 Guía de Diagnóstico de averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico calificado personal de un centro autorizado de servicio.
  • Página 30: Garantía Limitada

    A . Suministrar prueba fechada de compra y la historia de mantenimiento del producto . B . Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía . Los costos de flete correrán por cuenta del comprador .
  • Página 31 NB003008 Notes/Notas...
  • Página 32 Operating Instructions Manual de Instrucciones de Operación Manuel d’utilisation Notes/Notas...

Tabla de contenido