Campbell Hausfeld IRONFORCE IFN00300 Manual De Instrucciones

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death
and/or property damage! Retain instructions for future reference.
Table Of Contents
General Safety . . . . . . . . . . . . . . . 1 - 3
Specifications . . . . . . . . . . . . . . . . . . 2
Operating The Nailer . . . . . . . . . 3 - 5
Operational Modes . . . . . . . . . . . . . 4
Troubleshooting . . . . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . 8
Description
This nailer is designed for decorative
trim, molding, window casings,
furniture trim and picture frame
assembly. Features include: adjustable
exhaust, single sequential trigger,
quick clear nose, and an adjustable
depth of drive mechanism.
General Safety
Information
CALIFORNIA PROPOSITION 65
You
DANGER
!
can
create dust when you cut,
sand, drill or grind
materials such as wood,
paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
Excessive
WARNING
!
exposure to
vibration, working in awkward
positions and repetitive work motions
can cause injury to hands and arms.
Stop using any tool if discomfort,
numbness, tingling or pain occur and
consult a physician.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Campbell Hausfeld Nailers meet or exceed Industries' Standards as set forth by the American National
Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002.
© 2008 Campbell Hausfeld
1-1/4 inch Brad Nailer
This manual contains safety,
operational and maintenance
information. Contact your Campbell
Hausfeld representative if you have any
questions.
OPERATOR'S RESPONSIBILITY:
The tool operator is responsible for:
• Reading and understanding tool
labels and manual.
• Selecting an appropriate tool
actuation system, taking into
consideration the work application
for which the tool is used.
• The safe use of the tool.
• Ensuring that the
tool is used only
when the operator
and all other
personnel in the
work area are wearing ANSI Z87
eye protection equipment, and
when required, other appropriate
protection equipment such as head,
hearing and foot protection
equipment. Serious eye or
permanent hearing loss could
result.
• Assuring that the tool is kept in safe
working order as described in this
manual.
EMPLOYER'S RESPONSIBILITY:
• Selecting an appropriate tool
actuation system, taking into
consideration the work application
for which the tool is used.
• Ensuring that this manual is
available to operators and
personnel performing maintenance.
• The safe use of the tool.
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Model IFN00300
Model IFN00300
Locate model and date code on
tool and record below:
Model No. ______________________
Date Code ______________________
Retain these numbers for
future reference.
• Enforcing that the
tool is used only
when the operator
and all other
personnel in the
work area are wearing ANSI Z87 eye
protection equipment, and when
required, other appropriate
protection equipment such as head,
hearing and foot protection
equipment. Serious eye or
permanent hearing loss could
result.
• Assuring that the tool is kept in safe
working order as described in this
manual.
• Assuring the proper maintenance of
all tools in employer's possession.
• Ensuring that tools which require
repair are not further used before
repair. Tags and physical
segregation are recommended
means of control.
IN725200AV 2/08