Campbell Hausfeld NS219500 Manual De Instrucciones Y Operación

Campbell Hausfeld NS219500 Manual De Instrucciones Y Operación

Ocultar thumbs Ver también para NS219500:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 10 for important information about commercial use of this product.
operating instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Tool Components and
Specifications . . . . . . . . . . . . . . . . . . . . .2
Operating Instructions . . . . . . . . . . . . .4
Lubrication . . . . . . . . . . . . . . . . . . . . .4
Recommended Hookup . . . . . . . . . . .4
No-Mar Decking Tip . . . . . . . . . . . . . .5
Operational Mode . . . . . . . . . . . . . . .5
Single Cycle Mode . . . . . . . . . . . . . . .5
Bottom Trip Mode . . . . . . . . . . . . . . .5
Mode Conversion . . . . . . . . . . . . . . . .6
Loading The Tool . . . . . . . . . . . . . . . .6
Unloading The Tool . . . . . . . . . . . . . .6
Anti-dry Fire . . . . . . . . . . . . . . . . . . . .7
Fasteners Information . . . . . . . . . . . . .9
Troubleshooting Chart . . . . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . . . . . . . .10

Description

This nailer is designed for framing,
trusses, sub-floors, sheathing, exterior
decks, and pallet/create assembly .
Features include: convenient top
loading magazine, no-mar tip,
adjustable exhaust, single cycle trigger,
and an adjustable depth of drive
mechanism .
Campbell Hausfeld Tools meet or exceed Industries' Standards as set forth by the American National Standard
Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002 .
© 2009 Campbell Hausfeld/Scott Fetzer
Framing Nailer

Unpacking

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit .
Make sure to tighten fittings, bolts, etc .,
before putting unit into service .

Safety Guidelines

This manual contains information
that is very important to know and
understand . This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS . To help
recognize this information, observe the
following symbols .
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NoTE: Information that requires special
attention .
important Safety instructions
iNSTrUCTioNS pErTaiNiNG To a
riSK oF FirE, ElECTriC SHoCK, or
iNJUrY To pErSoNS
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Models NS219500
Locate model and date code on
Danger indicates an
tool and record below:
imminently
Model No .: _____________________
Date Code: _____________________
Warning indicates a
potentially
should always be followed, including
Caution indicates a
the following:
potentially
CaliForNia propoSiTioN 65
contain chemicals known to the State
Notice indicates
of California to cause cancer and birth
important
defects or other reproductive harm.
Wash hands after handling.
dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
NS219500
Retain these numbers for
future reference .
When using tools,
basic precautions
This product or
its power cord may
You can
create
IN715703AV 6/09
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld NS219500

  • Página 21: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. IN715703AV 6/09 Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002 . 21-Sp...
  • Página 22: Instrucciones De Seguridad

    . Manténgase alerta. Mire lo que apliquen . en contacto con su representante está haciendo y use el sentido f . Siempre use protección Campbell Hausfeld si tiene alguna común cuando haga funcionar la para los ojos. pregunta . herramienta. No use la herramienta si está...
  • Página 23: Uso Y Cuidado De La Herramienta

    NS219500 instrucciones de seguridad peligrosa cuando está en manos de usuarios inexpertos . importantes (Continúa) Desconecte siempre f . Cuide su herramienta. Mantenga i . Siempre asuma que la herramienta la herramienta de la una herramienta para cortar contiene clavos. No apunte con la fuente de energía...
  • Página 24: Conexión Recomendada

    Manual de Instrucciones de Operación instrucciones de seguridad SErviCio b . No use nunca oxígeno, dióxido importantes (Continúa) de carbono, gases combustibles a . El servicio de la herramienta debe o ningún gas en botellas como ser realizado sólo por personal de suministro de aire para la reparaciones calificado.
  • Página 25: Punta De Carga Y Descarga No

    NS219500 iNSTrUCCioNES DE 3 . Use siempre mangueras de 4 . Palanquee suministro de aire, con una presión FUNCioNaMiENTo (Continúa) la punta La punta no mínima de funcionamiento con desgastable La super ficie de clasificación igual o mayor que la...
  • Página 26: Modo De Operación

    Póngase en contacto con su La herramienta No DEbE opErar . trabajo contra la superficie de trabajo . representante Campbell Hausfeld si No use la herramienta si opera tiene alguna pregunta . El gatillo deberá soltarse luego de haber sin apretar el gatillo .
  • Página 27: Cómo Cargar La Clavadora

    CÓMo aJUSTar la pENETraCiÓN la dirección deseada . cargador . DEl Clavo qUE HaCEr CUaNDo la La NS219500 viene equipada con un ClavaDora TENGa UN Clavo 3 . Cargue la tira mecanismo clavador de profundidad aTaSCaDo de sujetadores ajustable .
  • Página 28: Instrucciones De Uso Y

    Clavos Los clavos usados con la clavadora de armazones NS219500 de Campbell Hausfeld también se pueden usar con las clavadoras Campbell Hausfeld NS21900, Sears 18465, Porter Cable FR350, Hitachi NR83A, Senco FramePro 702XP, 752XP, Ridgid R350RHA y DeWalt D51844, D51845 .
  • Página 29: Guía De Diagnóstico De Averías

    NS219500 Guía de Diagnóstico de averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico calificado personal de un centro autorizado de servicio.
  • Página 30: Garantía Limitada

    A . Suministrar prueba fechada de compra y la historia de mantenimiento del producto . B . Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía . Los costos de flete correrán por cuenta del comprador .
  • Página 31 NS219500 Notes/Notas...
  • Página 32 Operating Instructions Manual de Instrucciones de Operación Manuel d’utilisation Notes/Notas...

Tabla de contenido