Idiomas disponibles
Idiomas disponibles
Safety Definitions
• Save all instructions
Safety Warning Symbols:
Indicates WARNING, DANGER, or
CAUTION.
Read operator's manual before
operating this machine. Failure
to follow directions could result in
serious injury.
Always wear eye protection that meets
or exceeds the requirements of ANSI
Z87.1. Wear hearing protection. Wear
breathing protection.
Do not use if children or bystanders
are present.
Control and Operating Symbols:
Choke Control:
Run/Warm Start
Choke/Cold Start
Fuel Primer:
Press 6 times.
Ignition Switch:
ON/RUN
OFF/STOP
Safety Alert Symbols
The information listed below should be read and understood by the operator. We utilize the symbols below to allow
the reader to recognize important information about their safety.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
CAUTION
injury or equipment/property damage
Questions? Call Toll Free at 1-800-737-2112
Fuel Mixture
50:1
Unleaded Gas: 2 Cycle Oil
Caution: Do Not Use Gas
Mix with More Than 10%
Methanol or Ethanol
ENG - 2
Copyright © 2016 MAT Engine Technologies, LLC
Keep hands, feet, and clothing away
from rotating tines. Contact with
rotating tines may result in serious
injury.
Engine exhaust contains carbon
monoxide, an odorless and deadly
gas. NEVER run unit indoors or in a
poorly ventilated area.
To reduce risk of fire, clean spilled
gas and oil and keep unit free
from debris. Gasoline is extremely
flammable. Allow machine to cool
completely before refueling.
Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts
get extremely hot from operation and
remain hot for a short time after the
unit is turned off.
Fuel Mixture:
50:1
(Unleaded Gas : 2 Cycle Oil)
Throttle Control:
SLOW
FAST
