Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
3
Unplug the Blender before cleaning.
Wipe the base and the cord with a warm,
damp cloth and dry with a soft cloth.
SANITIZING THE BLENDER
1. Remove any remaining contents from the Blender Jar.
2. Prepare a 200 ppm sodium hypochlorite solution* using 1.75 L of hot water in the
Blender Jar. Place the Lid on the Blender Jar, and make sure the Blender Jar is fully in
place on the blender base.
3. Run the Blender on the Max Speed setting for 35 seconds. Flip the Start/Stop Toggle
Switch up or down to start the Blender.
4. Turn off the Blender and let the sanitizing mix sit in the Blender Jar for an
additional 2 minutes.
5. Pour out the sanitizing solution mix. Do not rinse the Blender Jar.
6. Place the Lid on the Blender Jar. Make sure the empty Blender Jar is fully in place on
the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse
the jar after sanitizing.
7. Allow the Blender Jar to air dry.
FOR DETAILED INFORMATION ON USING AND CLEANING THE BLENDER
Visit
www.kitchenaid.com/quickstart
and tips on how to clean your Blender.
* To prepare a 200 ppm sodium hypochlorite solution: use 6.67 ml household bleach (with a 5.25% sodium
hypochlorite concentration) in 1.75 L of hot water.
8
W11593783A.indb 8
W11593783A.indb 8
4
Dishwasher-safe, top rack only:
Lid, Tamper, and Ingredient-measuring
Cap.
Dishwasher-safe, bottom rack only:
Blender Jar.
All parts may also be washed by hand with
a damp cloth and warm soapy water, and
then rinsed with warm water and dried
with a soft cloth.
for additional instructions with videos, inspiring recipes,
4/28/2022 10:41:50 AM
4/28/2022 10:41:50 AM
