Idiomas disponibles
Idiomas disponibles
30
C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
How to install the drain hose
1
Fit the end of the drain hose to the outlet of the drain pump and tighten the clamp.
2
Firmly insert the free end of the drain hose into the drain opening of your home.
Make sure the soft rubber end is completely inside the drain opening.
• If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses
with the cable tie (ribbed side on inside).
• If your drain is a standpipe, fasten the drain hose to the standpipe with the cable tie provided.
Note
The discharge height should be approximately 0.9~1.2m from the floor.
Cable Tie
Cable Tie
