Idiomas disponibles
Idiomas disponibles
12
U
se of Water, Detergent, Bleach and Softener, Additives
Adding Detergent
Add measured detergent to the detergent
compartment of the dispenser drawer.
Do not exceed the maximum fill line.
Detergent is flushed through the dispenser at
the beginning of the wash phase. Either
powdered or liquid detergent can be used.
Detergent usage may need to be adjusted for
water temperature, water hardness, size and
soil level of the load. Avoid using too much
detergent in your washer, as it can lead to
oversudsing and detergent residue being left
on the clothes.
Adding Fabric Softener
If desired, pour the recommended amount
of liquid fabric softener into the left-hand
compartment. Use only liquid fabric softener.
Dilute with water to the maximum fill line.
Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the
fabric softener, which could stain clothes.
NOTE: Do not pour fabric softener directly
on the wash load. It may stain the
clothes.
Adding Wash Boost Additives
The Wash Boost dispenser may be used to
clean heavily soiled or stained garments
more efficiently.
If desired, place the additives for the
wash Boost setting in the right-hand
compartment. Use only liquid additives.
Do not exceed the maximum fill line to
avoid
Overfilling can cause early dispensing of
presoak additives, which could result in
damaged clothes.
NOTE: Do not pour additives directly on the wash load. It may stain the clothes.
