Operations - Yamaha ATS-1050 Manual De Instrucciones

Operations

Indicators
The indicators on the top panel flash or light up, to
indicate the operation and setting status.
In this manual, illustrations of the nine in-line indicators
are used for explanation.
: Off
: Lights up
: Flashes
(Example: When the PLII indicator and SURROUND indicator
flash, and the TV indicator lights up)
8
Input keys
Select an input source to be played back.
TV ....................TV audio
BD/DVD ...........Audio from a device connected to
the BD/DVD input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
BLUETOOTH
.........................Audio from a
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV's input
source to the playback device.
• For details on connection, refer to "Listening to the
sound from a device" (p.10).
SUBWOOFER keys (+/-)
Adjust the volume of the subwoofer.
Volume down (–) Volume up (+)
VOLUME keys (+/-)
Adjust the volume of the sound bar.
Volume down (–) Volume up (+)
★
LEARN key
Sets the sound bar to the TV's remote control
learning mode (p.12).
★: Keys that require pressing for more than 3 seconds
LEARN, BLUETOOTH STANDBY, AUDIO DELAY
1
Remote control signal transmitter
Transmits infrared signals.
connected
2
★
BLUETOOTH STANDBY key
Enables/disables the
(p.11).
★
3
★
standby mode