Pull Chain Operating Instructions; Maintenance - Fanimation Cancun Manual Del Propietário

1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 26)
2. Check the operation of the fan by gently pulling on
the fan speed pull chain. (Fig. 27)
Pull Chain Operating Sequence
1 Pull
st
2 Pull
nd
3 Pull
rd
4 Pull
th
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then
slide the reverse switch to the opposite position and
turn fan on again. Your fan model is equipped with a
4-position, 3-speed, pull chain switch. (Figure 28)
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
4. <<FP8011OB ONLY>> Check the operation of
the down light by gently pulling on the light pull chain.
(Figure 29)
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.

Pull Chain Operating Instructions

High
Medium
Low
Off
Switch Position
Right
Left

Maintenance

FP8009OB
FP8009OB
REVERSE
SWITCH
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
11
MAIN FUSE BOX
Figure 26
FP80011OB
Figure 27
FP80011OB
Figure 28
Figure 29
CAUTION
REVERSE
SWITCH