How To Operate Your Ceiling Fan - Pull Chain - Fanimation ISLANDER FP320-1 Serie Manual Del Usuario

How to Operate Your Ceiling Fan - Pull Chain

1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
2. Check the operation of the fan by gently pulling on
the fan fob. (Figure 2)
Fan Pull Chain Operating Sequence
st
1 Pull
nd
2 Pull
rd
3 Pull
th
4 Pull
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Slide the
reverse switch on the switch cup assembly to the
opposite position and turn fan on again. (Figure 2)
Reverse Switch Information
Season Rotation Direction
Summer Counterclockwise
Winter Clockwise
High
Medium
Low
Off
Switch Position
Down
Up
15
Main Fuse Box
Figure 1
Reverse
Switch
Speed Control
Pull Chain
Figure 2