Installing The Canopy Housing; Operating Instructions - Tr24Wh Hand-Held Remote; Maintenance - Fanimation The Cumulos Manual Del Propietário

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

NOTE: This step is applicable after the necessary wiring

is completed.

▲WARNING

To avoid possible fire or shock, make sure that the

spliced electrical wires are turned upward and completely

pushed carefully up into the junction box and not pinched

between the housing and the ceiling.

1. Loosen the two shoulder screws in the Hanger Bracket

with a screwdriver (Figure 1a).

2. Securely attach the Canopy Housing over the shoulder

screws (Figure 1b).

3. Securely attach and tighten the Canopy Screw Cover

over the shoulder screws in the Hanger Bracket utilizing

the keyslot twist-lock feature (Figure 1b).

Operating Instructions – TR24WH Hand-held Remote

▲WARNING

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors, except for the ground wire.

1. Operating & Using Hand-held Remote (Figure 1):

Install two piece of 3 volt battery (If not using for long

periods of time, remove battery to prevent damage to

hand-held remote). Store the transmitter away from excess

heat or humidity.

• HI Push Button – high fan speed

• MED Push Button – medium fan speed

• LOW Push Button – low fan speed

• OFF Push Button – fan off

• Light Push Button – toggles on/off and brightness control

for optional light arms

Periodic cleaning of your new ceiling fan is the only

maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to

avoid scratching the finish.

Abrasive cleaning agents are not required and should be

avoided to prevent damage to finish.

RECOMMENDED:

and light kit screws are tight and secure.