Idiomas disponibles
Idiomas disponibles
Typical Direct Mount Installation (to underground tank)
WARNING! Threaded pipe joints and connections should be sealed with the
appropriate sealant or sealant tape to minimize the possibility of leaks.
Materials:
the ground when installed in the tank flange.
1-
installed into the tank adapter with the tank adapter installed into the
DIRECT MOUNTING INSTALLATION diagram).
Threaded pipe joint sealant appropriate for application.
Installation Procedure:
1)
flange; seal threads liquid tight
with appropriate sealant.
2)
coupling onto the top of the
pipe; seal threads liquid tight
with appropriate sealant.
3)
Install the 1-
tank adapter. Seal threads
liquid tight with appropriate
sealant.
4)
Install the tank adapter into the
tight with appropriate sealant.
5)
Mount pump on tank adapter;
seal threads liquid tight with
appropriate sealant.
TANK ADAPTER
MAXIMUM LIFT
Additional specifications on page 15.
5
(see
