Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Cordless chain saw with chain and bar
• Cutting bar sheath
• Replacement cutting chain
• 24V iON+ lithium-ion batteries (2)
• 24V iON+ lithium-ion battery charger
• Manual with registration card
1. Carefully remove the cordless chain saw and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
chain saw. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Battery Pack Operation
The equipment is powered by 2 lithium-ion batteries. The
battery packs are completely sealed and maintenance free.
m
WARNING!
The chain saw can only be powered by
both of the batteries together. Use one battery cannot
provide sufficient power to the tool. Make sure to use two
batteries of the same voltage and the same capacity. Using
the tool with batteries of different capacity will cause damage
to the batteries.
m
WARNING!
Before first use, the batteries require at
least 55 mins charge time for each to be fully charged. When
the batteries are at low capacity, recharge for 55 mins again
for each before resuming operation.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button
to read off the battery charge level from the LEDs of the battery
indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
customer service center at
®
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be working,
connect the battery to the charger and charge as needed.
NOTE: Immediately after using the battery packs, the charge
level buttons may display a lower charge than they will if
checked a few minutes later. The battery cells "recover" some
of their charge after resting.
Charger Operation
m
WARNING!
Charge only 24V iON+ lithium-ion
battery packs with their compatible 24V iON+ lithium-ion
charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-LTE
Lithium-Ion Batteries
NOTE: The iON+ 24VBAT-LTE lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before connecting it with the charger.
• Use the battery charge indicator lights to determine when to
charge your iON+ 24VBAT-LTE lithium-ion battery packs.
• You can "top-off" your battery packs' charge before starting
a big job or after a long day of use.
8
