78046 LG Dshwshr OM ENSPv08.qxd
4/2/08
BEFORE CALLING FOR SERVICE
Problem
Cloudiness on glassware
Black or gray marks on
dishes
Yellow or brown film on
inside surfaces of
dishwasher
Dishes don't dry
Lamps don't illuminate
Sprays arms do not
rotate smoothly
Upper rack crooked
IE Error
OE Error
FE Error
E1 Error
HE Error
TE Error
The display shows PF
If you have followed this troubleshooting guide and the problem persists, or if the problem you are
experiencing is not listed here, please call LGE Customer Service at 1-800-243-0000.
6:26 PM
Page 21
All manuals and user guides at all-guides.com
T RO U B L E S H O OT I N G
Possible Causes
Solutions
Combination of excessive detergent and
Use less detergent and use a rinse aid to minimize
soft water.
the problem.
Aluminum items rubbing dishes
Reposition the dishes.
during cycle.
Coffee or tea stains.
Eliminate the stain by using a stain removal product.
Rinse agent dispenser empty.
Check and refill the rinse agent dispenser if empty.
Power is not connected.
Connect power supply.
Fuse is blown or circuit breaker tripped.
Replace fuse or reset circuit breaker.
Holes of spray arms are blocked by food
Clean the holes of spray arms.
particles.
Rack is poorly adjusted.
See Using Your Dishwasher section.
Water inlet problem
Check for clogged, kinked or frozen water inlet hose.
Check water supply.
Drainage problem
Check for clogged, kinked or frozen drain hose.
Excessive water supplied.
Water leakage problem.
Please call your Authorized Service Center or LGE
Heater circuit failure.
Customer Service at 1-800-243-0000.
Thermistor failure or very high inlet
water temperature (over 194°F).
The dishwasher experienced a power
This is not an error. The dishwasher will restart
failure.
automatically after 10 seconds.
(continued)
21