Idiomas disponibles
Idiomas disponibles
6. USB Connection
With your Speaker, you can enjoy music that is stored on a USB storage device such as an MP3 player. Plug
your USB storage device into the USB port of your Speaker. The music will play automatically. if not, Press
Mode button to select USB mode and press Play/Pause on the unit. Or please check if the USB device
contains playable audio contents.
7. FM Radio
-1) Press Mode button to select FM radio mode.
-2) Auto tuning : Press and hold Play/Pause button on the unit for 3 seconds until the frequency indication
starts to change, then release. The unit will search and store the stations, a maximum of 30 stations can be
stored.
-3) Manual tuning : Press Skip-/+ button to manual select the desired FM frequency.
-4) Select the stored stations: Press Play/Pause first , the display will show the stored station number, then
press Skip-/+ to select the station.
8. AUX Connection
1) Press Mode button to select Aux mode. 2) Connect a 3.5mm audio cable to: the headphone or audio
line-out socket of your audio device and the AUX in jack of this speaker. 3). Turn on your audio device and it
starts playing.
9. EQ Mode and Bass Boost
-1) Press the EQ button to scroll through the six di erent EQ settings:
Eq-1 ...... Flat
Eq-2 ...... Rock
Eq-3 ...... Jazz
Eq-4 ...... Classic
Eq-5 ...... Pop
-2) Press Bass Boost button to get the super bass sound.
-3) If Mic 1/Mic 2 is plugged with the microphone , the EQ setting will be o . Press EQ button,
the display will shows: VOCA, DUCI, EqOF .
And the settings are as below:
VOCA: means Vocal Cut, if the display show VOCA, will cut the vocal of the music/radio.
Then you can speak or sing with the microphone.
DUCI: means Music Ducking, if the display show DUCI, the music/radio sound will duck,
when you speak via microphone.
EqOF: means EQ setting o .
10. Light
-1) Long Press the light button to turn on or turn o the light;
-2) Short press for select LED mode for show di erent light e ects (default setting LED 1):
Led-1 : LED will be demo display if no music playback, if detected the music ,
the LED Color flash and change in synch with the music.
Led-2 : Color flash and change in a fixed rhythm.
11. Specification
-1) DC Charge Power input: 5V DC/2A
-2) Built-in Battery: Li-ion 7.4V/2500mAh
-3) Total Output Power: 40 W
-4) USB output: 5V DC/1A
-5) Speaker drivers: 6.5 inches driver / 1.5 inches tweeter
-6) Speaker impedance: 4 ohm
-7) Maximum RF Power: 4dBm
-8) Signal to noise（S/N）ratio: 65dBA
3
-9) FM frequency: 87.5-108.0 MHz
-10) Bluetooth Version: 5.0
-11) Bluetooth profile: A2DP, AVRCP
-12) Bluetooth range: Approx. 10m (33 feet)
-13) USB format: FAT16, FAT32
-14) USB file format: MP3, wma, wav
-15) Dimension(WxDxH): 13 x 6.5 x 12 inch
-16) Net weight: 6.6 lbs
