Idiomas disponibles
Idiomas disponibles
Telephone Helpline: 0845 146 2887 (United Kingdom)
Thermal Cut-Out Reset
Buffalo Fryers are fitted with a Thermal Cut-Out safety feature. Should
the temperature exceed safe levels the appliance will automatically cut
power.
To reset the appliance aftera sufficient cool-down period:
Unscrew the cover of the Safety Cut-Out reset switch.
1.
Press the small reset switch down until it clicks, using a blunt
2.
pointed instrument.
The appliance is now reset and can be used as normal.
3.
Cleaning, Care & Maintenance
•
Always turn Off the appliance and disconnect from the power supply before cleaning.
•
Always allow the oil to cool before cleaning, ideally for at least 6 hours.
•
Check the temperature with a suitable probe thermometer; 40ºC is the MAXIMUM temperature at
which oil should be removed.
•
For best performance, BUFFALO recommend that the appliance is cleaned after each day of operation.
Note: Failure to clean the appliance regularly may result in premature activation of the
thermal cut-out switch.
•
Remove the Element/Control Panel for ease of cleaning.
•
Empty the oil to clean the appliance thoroughly.
Note: L300/L301 Fryers come with a tap at the front of the appliance to drain the oil
from the pan. For all other models use a suitable vessel to remove the oil.
WARNING: DO NOT remove the oil pan until AFTER it has been emptied.
•
If the oil is to be reused then filtering it before refilling the pan will extend the oils cooking life.
•
Use a suitable detergent to clean the interior of the appliance.
•
Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
•
Dry thoroughly after cleaning, ensure there is no water left in the fryer.
Note: L300/L301 only - When refilling ensure the tap is in the CLOSED position.
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
Reset
Switch
UK
4
