Samsung WF45R6100AP/US Manual Del Usuario página 53

Code
Check the washing heater.
HC
• Power off the washer, and then contact a Samsung service center.
Check the spinning process.
• The load may not be balanced inside the drum. Check the drum and
UB
• Press Start/Pause (Hold to Start) to resume operation or power the
Check the MEMS sensor.
8C, 8C1, 8C2
• Power the washer off. Wait 2-3 minutes, power the washer on, and
Water may overflow.
OC
• Close the water valve and call for service.
Check the motor.
3C
• Power the washer off. Wait 2-3 minutes, power the washer on, and
Check the PBA communication status.
AC6
• Power the washer off. Wait 2-3 minutes, power the washer on, and
The electronic control needs to be checked.
9C1, 9C2
• Check if power is supplied properly.
• If the information code remains, contact a Samsung service center.
System failed.
SF
• Power off the washer, and then contact a Samsung service center.
If any information code keeps appearing on the screen, contact a local Samsung service
center.
make sure the load is balanced.
washer off, wait 2-3 minutes, power the washer on, and then try
again.
then try again.
then try again.
then try again.
Action
English 53