Better Homes and Gardens BH48-084-099-55 Instrucciones De Montaje página 3

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-
abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manuals.
NOTE:
IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF
WITH DAMP CLOTH.
Insert the wood dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.
1
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw cam bolt into the pre-drilled small holes on panel. Connect both panels together; making sure cam
bolt goes into pre-drilled hole on the end of panel with cam lock.
2. Insert cam lock into pre-drilled large hole on panel. Make sure arrow on cam lock is pointed towards cam
bolt.
3. Once cam bolt is connected inside cam lock, take a Phillips screwdriver and tighten cam lock clockwise.
4. Plug cam cap into the cross slot of the cam locks to conceal the cam.
IMPORTANT
2
X
CAM LOCK SYSTEM OPERATION
You are now ready to assemble the TV console.
X
3
3 4
FINAL