Idiomas disponibles
Idiomas disponibles
Technical Data
Rated Voltage ................................................. 120V AC | 60 Hz
Motor .............................................................. 1500W | 13-amp
Max Water Inlet Temperature ............................... 104ºF (40ºC)
Max Water Inlet Pressure ............................................. 101 PSI
Foam Cannon Capacity ................................ 11.2 fl oz (330 ml)
High Pressure Hose Length........................................ 20 ft (6 m)
Power Cord Length ............................................... 35 ft (10.7 m)
Max Pressure at initial discharge ................................ 2050 PSI
per CSA internal pressure testing
Rated Pressure under typical load .............................. 1600 PSI
Max Flow with nozzle open ......................1.65 GPM (6.2 L/min)
at minimum pressure
Rated Flow under typical load ....................1.1 GPM (4.2 L/min)
Net Weight ........................................................ 16.3 lbs (7.4 kg)
Unpacking
Carton Contents
• Electric pressure washer
• Top handle
• Screws (2)
• Trigger gun holder
• Cord holder
• Wheels (2)
• Spray wand
• Trigger gun
• Foam cannon
• Quick-Connect nozzles (0º, 15º, 40º)
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Garden hose adapter (female coupler)
• Manual with registration card
1. Carefully remove the electric pressure washer and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the pressure washer.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
customer service center at
®
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver.
1. Slide the handle into the top of the pressure washer, and
attach it using two screws as shown (Fig. 1).
Fig. 1
Top handle
Screws
2. Slide the trigger gun holder into position (Fig. 2).
Fig. 2
Trigger gun holder
6
