Idiomas disponibles
Idiomas disponibles
Operation
6.1
Energy saving tips
Choose a well ventilated installation location which is protected against
direct sunlight.
If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
6.2
Using the cooler
NOTICE! Risk of damage
A
Ensure that the objects or goods placed in the cooling device
are suitable for cooling or warming to the selected temperature.
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze and
can therefore destroy glass containers.
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 5 1, page 4) into the cigarette
lighter socket or a 12 V socket in the vehicle (fig. 2, page 3)
or
➤ Connect the 220-240 V connection cable (fig. 5 2, page 4) to the
220–240 V AC mains supply.
➤ Push the ECO switch (fig. 4 H, page 4) to the required position
✓ The cooler starts to cool or heat the interior space.
➤ When you stop using the cooler, set the switch to "OFF" and disconnect
it from the mains.
6.3
Connecting to the cigarette lighter
I
NOTE
If you connect the cooler to the cigarette lighter, remember that the
ignition must be turned on to supply it with power.
20
CoolFun TD26
EN
