Diamond LUKE-3M Manual De Instrucciones página 11

EN
INSTALLATION
Carefully read the instruction manual.
The mains connection must comply with the safety regulations in force in the country
of use.
The socket must be in conformity with the type of plug installed on the same and its size
shall comply with the data of the serial number plate.
The machine must be connected to a grounding system in accordance norms in force
and connected to a system with differential magnetothermal switch.
The power cord must be protected from contact with liquids, should not be crushed, it
must not be wound in a coil when the machine is in operation, must not be tampered
with.
If the power cord is damaged, it must be replaced by the Manufacturer or by the
technical assistance service or in any case a person with similar qualification, so
as to prevent any risk.
It is prohibited to:
i
nstall the machine in different ways than those described in this manual.
install the machine in areas where a jet of water can be used.
use the machine in the vicinity of inflammable and/or explosive substances.
use spare parts which are not recommended by the manufacturer. All repairs can be
performed only by a specialist and trained personnel.
make any technical changes to the machine.
wash the machine with a water jet.
utilise the machine in different ways than those described in this manual.
use the machine in altered psychophysical conditions.
Install the machine in the vicinity of machines that can be a source of heat to other
appliances.
use of the machine in an environment of fire risk;
use of the machine for dispensing substances not suited to the characteristics of the
same.
use of the machine in an environment with a low or insufficient volume of air ventilation.
obstruct the grilles positioned to the side of the machine, either with fixed elements or
with mobile elements (such as glasses and other accessories).
installation of the machinery in external environments or outdoors.